Granular pattern conveyor belt
Consists of two parts, the baseband and decorative pattern, have higher bring body or concave on the surface of embedded with granular pattern, also pits can be made into square hole shape or prismatic and cloth grain shape. Convex granular pattern suitable for soft packing material or need to have a grasp on conveying, such as cardboard boxes or without sliding conveying. Pit shape of granular pattern is suitable for the 45 degree Angle or less granular material conveying. Product features: With higher body or concave on the surface of embedded with granular pattern, also can be made square hole or pit prismatic and cloth grain shape. Product use: Convex granular pattern suitable for soft packing material or need to have a grasp on conveying, such as cardboard boxes or without sliding conveying. Pit shape of granular pattern is suitable for the 45 degree Angle or less granular material conveying. The component of product: Consists of two parts, baseband and decorative pattern. Conveyor belt maintenance: Pattern conveyor belt in the transportation and storage, should keep clean and avoid direct sunlight or snow and rain leaching leaching, prevent from acid, alkali, oil, organic solvents, such as contact material, heating device and distance one meter away. When the storage warehouse temperature should be between 18 to 40 ℃, relative humidity should be kept between 50-80%. During storage, conveyor belt must be placed in rolls, and may not be folding, should be placed during quarterly turn once. The layer number of different types and specifications of the conveyor belt should not be connect together to use, its connection with glue joint is best. Conveyor belt type, structure, specification and layer should be selected according to conditions of use reasonable. Conveyor belt running speed should not be commonly more than 2. 5 m/s, big pieces, abrasion resistant materials and use fixed discharging device should be used as far as possible at low speed. Conveyor transmission roller conveyor belt and the diameter of the relationship between layers, drive roller, redirection roller and the requirement for roller groove Angle should be prescribed according to the design of the conveyor, reasonable selection. Feeding direction should be along the conveyor belt running direction, to reduce the material impact on conveyor belt down shall adopt chute, reduce material falling distance; Conveyor belt material section should shorten the roller spacing and the buffer roller for material leakage, take to use soft moderate keep-off board, in order to avoid gear plate quality, scraping the broken conveyor belt surface.
