Stripe pattern conveyor belt
Strip transverse conveyor belt surface is higher than the belt body stripe pattern, decorative pattern is divided into high, medium and low three, each pattern according to the arrangement spacing can be divided into thin and dense form. It is suitable for the application scope of 30 degree Angle or less level of transport packaging. If under the condition of into a trough, can replace the herringbone pattern conveyor belt. Strip transverse conveyor belt surface is higher than the belt body stripe pattern, decorative pattern is divided into high, medium and low three, each pattern according to the arrangement spacing can be divided into thin and dense form. It is suitable for the application scope of 30 degree Angle or less level of transport packaging. If under the condition of into a trough, can replace the herringbone pattern conveyor belt. Product features: Has a wide use range, cover an area of an area small, no transshipment point, reduce construction investment and maintenance costs low, large throughput, etc. Conveyor belt in use should be paid attention to the following: 1. Avoid rollers is covered by the material, causing the rotation, to prevent leakage of material between the roller and the tape, pay attention to the lubrication conveyor belt activities section, but not greasy dirt conveyor belt; 2. To prevent the conveyor belt load startup; 3. Conveyor belt running deviation, timely measures should be taken to correct; 4. Found local damaged conveyor belt, the application of viscose repair in time, lest expanding;
