The waveform of large dip Angle guard conveyor belt
By the lateral rigid and baseband waveform guard and diaphragm plate after secondary sulfide, the waveform guard with feature good rigidity as a whole, return not collapsed, tearing resistance, QuRao resistance, impact resistance, smooth operation. Widely used in ports, food, metallurgy, mining, chemical, foundry, construction machinery and other fields. In 0 ° to 90 ° Angle range, along the level, tilt, vertical transport bulk materials, small investment, high efficiency, save space. Strictly, guard of the belt conveyor belt is a variant, belong to the special-shaped conveyor belt, among them, raised edge conveyor belt corrugated baseband requirement has a certain tensile strength and abrasion resistance. Raised edge conveyor belt with free to leave the edge of the wave, in order to adapt to the request of the Angle to the, belt longitudinal have softness, lateral requires certain rigidity. Raised edge conveyor belt gold production of jing corrugated with special structural lateral stiffness of the baseband, solve the large size belt with collapse phenomenon in the return process. The structure of the baseband: Baseband is covered in rubber, under cover rubber, core and lateral stiffness layer of four parts. Cover the rubber thickness on for 3-6 mm; Under cover the adhesive thickness 1.5 4.5 mm, with core materials under tension, its material can be cotton canvas (CC), nylon (NN), EP canvas (EP) or just a rope (ST). In order to increase the transverse rigidity of the baseband, on the core on the body, if special strengthening layer, called lateral stiffness layer. The width of the baseband specifications, the same as the common adhesive tape. Waveform guard conveyor belt is widely quoted and port, metallurgy, mining, electricity, coal, foundry, building materials, food, fertilizers, and other fields material transfer. Can make all kinds of bulk materials to continuous transmission, 0-90 degrees in any Angle with transport large dip Angle, wide applicable scope, cover an area of an area small, no transshipment point, bue to reduce construction investment, low maintenance cost, etc. Solved the not ordinary conveyor belt or conveying Angle pattern conveyor belt can't reach. Raised edge conveyor belt waveform can be used according to the environmental requirements, designs a set of complete conveyor system, avoid the discontinuous and complex transportation system. Product features: Product characteristics (ordinary raised edge conveyor belt large Angle corrugated) : 1, increase the transmission Angle (30 ~ 90 degrees); 2, cover an area of an area small, less investment; 3, large throughput, hoisting height is higher; 4, from horizontal to sloping (or vertical) can smooth transition; 5, suitable for conveying easily scattered powder, granular, small block, paste and liquid materials; 6, low energy consumption, simple structure, adhesive tape, high strength, long service life. Varieties: According to different divided into ordinary rubber covering performance, heat resistant, flame retardant, cold resistant, acid and alkali resistant, oil resistant, etc
